Multiple INADS

[HtownMack]

I am currently adminstering a G3RsiV7. There are two of us here that do any work on the PBX and it seems only one of us can dial in at a time. Is there a way to create another dial in extension? Thank you guys in advance!

 

[mcopini]

Dialing in via the Inads analogue line will only allow 1 connection at a time. Another way to get more connections is to work with Data-modules. In this way 4 or more connections can be active at a time. Data-modules and the software you'll have to buy. Another way is to get an upgrade, buy a CLAN board and connect via IP. Much faster, multiple connections allowed and ready for VoIP and all sorts of CTI.

More questions? Shoot.
Kind Regards,
Maarten Copini

http://www.effecta.nl

-Please let fellow members know if their post was of any help-

 

[heyitsthephoneguy]

Or you could use a LANSAT for one connection through IP and the other uses the modem.

 

[jimbojimbo]

Setting up a Data Module (8400B) and dialing into a netcon channel will allow you to have the multiple connections you want.

Once you upgrade you can administer the switch across the network via the C-LAN card with multiple connections.

James Middleton
ACSCI/ACSCD/MCSE
Xeta Technologies
jim.middleton@xeta.com

 

[DPhil]

What's the max that can login at any one time via IP?

 

[telcoguy]

maximum number of simultanious logins over IP is 8, that is on V9.5.
Might be more on later releases.

 

[mcopini]

12 for Multivantage 1.1
Kind Regards,
Maarten Copini

http://www.effecta.nl

-Please let fellow members know if their post was of any help-