MPPP

[Batmaniac]

Hi there guys.

I'm having a different problem at work.
I have a Cisco 3620 configured as a reverse MUX for ISDN's. I've setup the virutal interfaces and virtual temlpates, a ip pool and everything.

The connection comes up and stabilishes ok.. If i ping the ether address from my connection it does fine, but if I ping any other thing, it only passes the first packet and then stops pinging..

The only thing it says that couth my attetion is:
"MLP: Forwarded to wrong interface".. Dunno why and when it happens !

Thank you in advance,

Thiago Modelli

 

[lui3]

please post the configuration

 

[johnpoole]

looks like a sec issue, without config ???

john poole
bellsouth business
columbia,sc

 

[Batmaniac]

sorry about the delay...
here goes my show tec ...

http://www.securitynews.com.br/conf.rtf

thanks

 

[Batmaniac]

Hey guys,
I still in need of help...
PLEEEEEASE.....

Thiago Modelli

 

[lui3]

frame-relay switching


why do you have this in the configuration. this should only be used for frame relay switch emulation or when you want to switch frame relay interface dlcis. i see no frame relay routing statements in the configuration. you should be able to remove this.

i am looking at the rest of the configuration. what is the function of this router. RAS?

Lui3
CCNP,CCDA,A+/Net+
Cisco Wireless Specialization

 

[lui3]

can you post the output from

debug ip icmp

after doing a ping that fails. that will tell us more. thanks.

Lui3
CCNP,CCDA,A+/Net+
Cisco Wireless Specialization

 

[lui3]

one other thing.

have you tried using extended ping to set the interface sourcing the ping request to ethernet 0/0. i have had issues with pinging from the router when the router was using an unroutable ip address to source the ping packets or an interface that other routers had no knowledge of in their routing tables. i know its a long shot but worth a try



Lui3
CCNP,CCDA,A+/Net+
Cisco Wireless Specialization

 

[Batmaniac]

I'll do those things and keep you posted..
thanks