Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Rhinorhino on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

mount

Status
Not open for further replies.

mario

Technical User
Joined
Jul 27, 2000
Messages
2
Location
MX
i have linux red hat 7.3 installed on my primary hard drive. the problem is that i can't mount second hard drive on wich i have winXP installed with fat 32 file system
i tried mount -t vfat /dev/hdc/dir command but it's not working please help..
 
This is the command...

mount -t vfat /dev/hdc /mount_point

You have to specify a mount point in your Linux filesystem (/mnt/win for example). I don't think that you can mount a directory without mounting the entire drive first, but I could be wrong.


ChrisP
 
1: create a dir where you later want your win partition in:
eg: mkdir /windows
2: mount it:
mount -t vfat /dev/hdc /windows
 
hdc? why not hdb0? The quickest way to become an old dog is to stop learning new tricks.
- John Rooney
 
Depends on whether the "second hard drive" is the primary slave or the secondary master.

hda = pri master
hdb = pri slave
hdc = sec master
hdd = sec slave
 
I have a similar problem ... I have a 5.25" floppy that Linux Mandrake 7.2 is completely ignoring. Any ideas? --Dan Hirsch
CEO of DanSoft
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top