Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Wanet Telecoms Ltd on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

More than 1 XM24 possible???

Status
Not open for further replies.

LegoGirl

Programmer
Aug 16, 2004
62
US
Hello all! Is it possible to have more than one XM24 connected to a 6416? Apparently 24 extra buttons just aren't enough.

Thanks in advance!
M. Curie
 
I dont think so. Try an 8434 with a expansion module. That will give you 58 buttons but it is the size of a tank.
 
You can connect the XM24 to a 6424 set; that will give you 48 buttons, plus 12 softkeys.

Susan
"A positive attitude may not solve all your problems, but it will annoy enough people to make it worth the effort."
- Herm Albright (1876 - 1944)
 
If space is an issue, get a 6424 phone. This gives you 8 more buttons (48 total), and uses the same amount of space. If you simply need busy indicators, then an attendant console (such as a 302c with module) might be a better solution. Those can show the status of up to 2000 extensions.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top