Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations derfloh on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
modem recognition
- Thread starter cds
- Start date
- Staff
- #2
Make sure that you have set the internal comport in NT. If the comport is not available (the com port that windows requires to talk to the modem) then windows NT will not even recognize it's there. Go to Settings, controlpanel, ports, and add a comport for the one the modem is speciying (by memory address and interrupt). Once Windows NT reboots the comport should be available and the mode should then be automatically recognized.
- Status
Similar threads
- Locked
- Question