mminfo query not so easy

[ptitechatt]

I know that this cmd:

mminfo -q "group=test, group=test1, group=etc... -r "ssid"

can't work because I only can use 1 group parameter, but is there a method to do this without using all the client of all group or not using the save pool...
maybe a syntax I don't know?

PS: sorry for my english

 

[605]

Not to my knowledge. But what do you want do achieve? With this command you will simply list all known save sets by ssid. Such list is not very useful.

 

[ptitechatt]

It is for make a clone strategy with

nsrclone -S -f clone.txt

I only have one pool in the config and i don't want to use this query

mminfo -q "pool=<pool>" -r ssid > clone .txt

because It will use 2 drives for all the clone process and it will be to long to clone.

I would like to create 3 pool and 5 "virtual group" of group to segment my clone

mminfo -q "group=test, group=test1, group=etc... -r "ssid"

< Here is my virtual goup...

 

[605]

I just tested with NW 7.2 and could verify that you in fact can use multiple groups within a query. Have not checked with previous versions.

 

[ptitechatt]

I ve tested with 7.2 following your post and you are right It works!!

my previos test were done with NW 7.1.2 that's why that didn't work

thanks