Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations derfloh on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
MMC cannot open the file c:\windows\system32\dsa.msc
- Thread starter mnassih
- Start date
- Thread starter
- #3
- Thread starter
- #4
Any errors besides "MMC cannot open the file c:\windows\system32\dsa.msc"? Have you attempted this action from a remote computer, and did it work? If it worked, I would say that there may have been a corruption in the .dll's, or you don't have permissions to either the .msc, or the MMC on the server you are attempting to open from.
- Thread starter
- #6
juniper911
Technical User
On the DC, can you open up other MMC's? e.g. Sites and Services, Domains and Trusts?
If you can then all you need to do is copy the dsa.msc file from another DC (I am assuming you have at least 2 DCs) and replace the dsa.msc on the troublesome DC.
If you can then all you need to do is copy the dsa.msc file from another DC (I am assuming you have at least 2 DCs) and replace the dsa.msc on the troublesome DC.
ChicagoRookie
IS-IT--Management
reinstall .net/framework.
Then You should open that.
CCNA & NETWORK+
My every answer is
"There seems to be no pattern of when this problem occurs."
for Users..
Then You should open that.
CCNA & NETWORK+
My every answer is
"There seems to be no pattern of when this problem occurs."
for Users..
- Status
Similar threads
- Question
- Locked
- Question
- Locked
- Question
- Locked
- Question