Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Chriss Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
mm711 initializing
- Thread starter wpetilli
- Start date
Have you done a 'nvram init' on the G450 before doing anything else? This will clean out it's RAM and memory, then restart programming. Upgrade the firmware on the G450 to latest, and make sure you load it on both Bank A and B, then login and see if the MM711 can be seen then.
WellingtonPaez
Technical User
I would check the MM HW and Software Ventage. Download the Matrix related to the version of CM that you are running. I have seen if software mismatch would cause the MM not to go to idle estate
- Status
Similar threads
- Locked
- Question