mixing EDO with FPM 1

[mrkk38]

OK, here's a good one....To make a long post short, I have a computer that has 16Megs of EDO and 16Megs of FPM and seems to work fine. Even ran a "endurance" test to see if it would lock up (I ran "Hardware Doctor's memory Benchmark test to see if the computer would lock up and it didn't).
My question is, should I keep it like this or yank out the FPM and put in real EDO.

 

[rwise2112]

It looks like your system will handle the mixed memory configuration just fine. It is Ok to leave like this, but you are limited to RAM access at FPM RAM speeds. If you had all EDO, there would be a slight performance increase.