Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations derfloh on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Mitel SX 200 NSU Baud Flow Control Info 1

Status
Not open for further replies.
JimHilton

JimHilton

IS-IT--Management
Joined
Jun 20, 2009
Messages
346
Location
CA
I'm trying to connect to this NSU via the maint port on the front. I can't seem to get a screen.

I've tried a straight thru and null, various baud rates but I'd like to get confirmation on if a null or a straight thru cable is needed.

Thanks!
 
Sort by date Sort by votes
Baud 38400 8 N 1. Normal RS232 cable will work.
 
Upvote 0 Downvote
Hi worked like a charm! thanks!

Jim
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

syscon411
  • Locked
  • Question Question
SX-200 MX password
Replies
14
Views
1K
The mitel guy
The mitel guy
idahomitel
  • Question Question
SIP/PRI SX 200 ICP Dividing channels for different trunk groups
Replies
14
Views
452
idahomitel
idahomitel
P
  • Locked
  • Question Question
SX-200 MX random reboot "T1 ISDN removed/installed"
Replies
12
Views
1K
Pipeline_50
P
C
  • Locked
  • Question Question
Mitel Sx200 digital
Replies
7
Views
701
The mitel guy
The mitel guy
idahomitel
  • Locked
  • Question Question
SX 200 ICP CFNA and xfer problems
Replies
18
Views
2K
The mitel guy
The mitel guy

Part and Inventory Search

Sponsor

Back
Top