Mitel 470 ,dect sip rfp37

[LuigiEspo]

Good evening I bought n 1 mitel 470; licenses; n18 Sip-Dect rfp37 and telephones dect voip. after setting IP address to the base station with the OpenMobility Configuration program, I go to the basestation web page and then let me base the basestation with OM OM (OM Managment Portal) ???

 

[zoo1]

Sorry - trying to understand your problem...
Copy iprfp3G.dnld to tftp folder of 470.
With OM configurator - scan and log in (usermm pass: omm),set up static IP, GW, netmask, 1st OMM IP address (if you have only one RFP - put own RFP IP address), tftp server IP (470 IP address), FW file name (iprfp3G.dnld),... Save and send config to RFP.
RFP will restart. Log in to RFP via web interface using above credentials - will prompt you to change password...configure SIP-DECT...

BR

 

[LuigiEspo]

ok these steps i had done, after configuring the basestation and i go into the list i basestation rfp37 i see it connected but not active, i also loaded licenses x 20 Sip dect

 

[LuigiEspo]

then how do i connect sip dect with mvo470 (always talk about configuration)

 

[LuigiEspo]

i have 18 sip dect when configuring 1st OMM ip address must be equal to all true?

 

[zoo1]

When activating, put all BS to same site, same cluster (if they are visible to each other)...if you have remote BS, same site, different cluster

 

[bojo3871]

It would be easier for the RFPs to take DHCP from the 470. As the DHCP option will tell them the OMM IP automatically. If not, point them all to your OMM manually.

Then like zoo1 explained, set the site and cluster to activate the BS in OMM.

BR/Bojo

 

[LuigiEspo]

Hi, then I activated the basestation but I can not record a dt690

 

[zoo1]

Check your parameters under SIP settings (connection to A470) - registar server, proxy server,...
Then create DECT user (matching with user created in A470)...
Display name
Number/SIP user name (from A470)
IPEI - optional (but sometime necessary) - from DECT phone
DECT authentication code - put any 4 digit (used when subscribing DECT as AC code)
Voicemail directory number
Under SIP - username and password - from user in A470
Then, click on
- Wildcard subscription - if you configured DECT without IPEI
- Start Subscription with configured IPEI (if you enetered IPEI for that DECT device) - Start
- On DECT phone, start new subscription

BR

 

[bojo3871]

Pay attention to what zoo1 mentioned. Make sure you turn on subscription when subscribing the DECT. If it fails, keep trying.

After it subscribes, then you have to login (FAC codes + user; then PIN)

BR/Bojo