Missing IDA Drivers what do you all think to this? 1

[Hamster38]

Thanks everyone for your contributions so far ,still im afraid unresolved but i would like your opinions on the following:-If i were to move the BAT jumper on the motherboard to its end position while the pc is off , wait a min then move the jumper back to its origional position , then boot the pc , should i think force the pc to dump all its loaded BIOS files then load fresh files strait from the BIOS? would like some feedback on this before trying cheers lads.
Mark

 

[electronicsfreak]

First off if im reading this correctly your talking about resetting the bios. If so be sure the computer is unpluged when doing so for damage to bios can result when resetting them while its plugged in. Also if you want to be really sure its reset, unplug it and take the battery out and let it sit for about 15 minutes. That should completely reset it. All this will do is put the bios back to the default standards that it was in when it was designed.