I have walked into a new customer site. The 2000 server they have was never promoted to a DC, so this is still a member server. There is a mirrored drive that has been setup and it is full, why would this happen? The Hard drive space on the other drive isn't at capacity yet. There are 3 volumes created and I'm wondering if that is why it is causing this. b/c the sys volume and the vol1 volume are one disk and the backup volume(mirrored drive) is the other hard disk and can't handle the data. have I solved my own question or is it something else?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations wOOdy-Soft on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
mirrored drive full
- Thread starter 350ztn
- Start date
michaylukr
MIS
Out of curiosity, are the two drives the same size?
- Status
Similar threads
- Locked
- Question
- Locked
- Question