My migration from 5.2c to 5.2e went without a hitch until I had to recompile RL.RMK and PE.RMK. The commands RMAKE RL /F and RMAKE PE /F both yielded the same error: Input parsing error at /posi. This comes from the script line: set rtlinkcmd=/posi. I am using RTLINK 7.0. Reinstalling RTLINK had no effect. Converting "posi" to "position" had no effect. Can't find any explanation of the /F switch. Any suggestions?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations derfloh on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Migration from 5.2c to 5.2e
- Thread starter Locarno
- Start date
Similar threads
- Locked
- Question
- Locked
- Question
- Locked
- Question