Am going to be upgrading a MICS 3.0 with NAM 3.0 in order to install PRI. I believe I can go to 6.0 directly, but am considering going to 4.1 then 7.0 as have spare 4.1 software. Question. One. Does FastRAD work with 3.0 and can you back up programming with it? Second is this the best way to upgrade without using upgrade tool i.e. NOT HAVING TO REPROGRAM? Since there is no PRI/DID's right now. The Target lines shouldn't be a problem. Also know I need to upgrade NAM BEFORE system.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations MikeeOK on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
MICS Upgrade from 3.0
- Thread starter chiden
- Start date
curlycord
Programmer
I believe you need to use your spare 4.1 then use tool to 7.0.
You will also need to upgrade Vmail to 4.1
You will also need to upgrade Vmail to 4.1
You must use the upgrade tool if you want to save your programming. The FastRAD should work, but you'll use Norstar Manager to backup a 3.0. If you make a stop at 6.1 you can then go to 7.0 without using the new upgrade tool.
Brian Cox
Brian Cox
- Status
Similar threads
- Locked
- Question
