Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations derfloh on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

MICS not picking up 2nd PRI

Status
Not open for further replies.
accumatt

accumatt

Vendor
Joined
Jun 15, 2005
Messages
39
Location
US
I have an MICS 6.1 with 2 PRI. Just added 2nd last week.
Both are in PRI A
When the all chanels of PRI 2 are full the 24th person gets "no free lines"

???
I am at my wits end
 
Sort by date Sort by votes
Just to see if it will go to the 2nd PRI take the first PRI out of the pool for the route.
 
Upvote 0 Downvote
Also don't forget to change your Min & Max. from 0 to 23 too 0 to 46. I think that is set under Dialing Plan.
 
Upvote 0 Downvote
Also don't forget to change your Min & Max. from 0 to 23 too 0 to 46. I think that is set under Dialing Plan.

Ha Ha that was it!
We found it last night.

Thanks for the reply.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

Spragers
  • Locked
  • Question Question
Automatic answering when picking up receiver
Replies
2
Views
479
Spragers
Spragers
P
  • Locked
  • Question Question
Incoming calls go to dial tone on Nortel MICS-XC 7.0
Replies
11
Views
2K
curlycord
curlycord
N
  • Locked
  • Question Question
Need support on dial 9 Nortel MICS PRI When dial 9 display states Invalid number. Incoming DIDS work fine. Been working for years. Provider
Replies
6
Views
1K
Nortel dino
N
Don W
  • Locked
  • Question Question
Mics software upgrade tools
Replies
9
Views
897
curlycord
curlycord
jsaad
  • Locked
  • Question Question
MICS GATC going dead
2
Replies
24
Views
2K
curlycord
curlycord

Part and Inventory Search

Sponsor

Back
Top