MICS E-RAD 1

[nadamson]

Does anyone know how I can reset our E-RAD as I do not know the password. F9** finds the unit but I can't get any further.

 

[NTL555]

I would check the FAQ section next time or do a search..

http://www.tek-tips.com/faqs.cfm?fid=3013

NTL555

 

[nadamson]

Yep, I've done that. What is the default password afterwards ?

 

[bkrike]

is the default

 

[NTL555]

there is no default password... you enter in the programming and put in your password...

NTL555

 

[Firebird Scrambler]

Hi Nick. E-Rads are used in the UK & the default passwords are different to the States. However they can be "downgraded" to accept just numbers instead of "LetTeRs" & "numbers"!.

All the best

Firebird Scrambler
Meridian Programmer in the UK

http://mysite.wanadoo-members.co.uk/firebird_scrambler

 

[NorstarTechChris]

Hi Firebird Scrambler

Can You Use The E-RAD To Download The Info
Do You Have The Default Password

Thanks Chris

 

[Firebird Scrambler]

The best way is to do a "downgrade" on the E-Rad so that the password can only be numbers. This will then allow you to use the NRU software.

All the best

Firebird Scrambler
Meridian Programmer in the UK

http://mysite.wanadoo-members.co.uk/firebird_scrambler

 

[swozi2004]

If the E-Rad is built like the FastRad, remove the battery thats soldered on the board. Leave it off for a couple of minutes and then soldered it back on.

 

[NorstarTechChris]

Hi Firebird Scrambler

Do You Have The Software To "downgrade" The E-RAD Unit
& How To Do It.

Hope You Can Help

I Have Removed The CAP As You Did & Have Reset The E-RAD As Per The Fast-RAD But The E-RAD Is Not The Same As A Fast-RAD It Will Not Reset The Password.

Thanks Chris