Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations wOOdy-Soft on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

MICS ASM CLID

Status
Not open for further replies.
jarodwinters

jarodwinters

Vendor
Jun 24, 2004
32
US
I have a situation where I have a PRI into an 0x32 and have another telephone system off of the MICS through an ASM. I have the target lines assigned to the ASM ports and the other phone system treats those ASM ports as trunks. My question is, and I have seen references to it, but does the new ASM support CLID. I need to get caller id to the other phone system through my ASM ports. Is it possible? Right now I know the ASM I have does not pass caller id but the ASM is about 4 years old so if the new ones provide it I may replace them. If anyone has any suggestion please let me know.
 
Sort by date Sort by votes
i dont think so, but let us know if you find one like that
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

P
  • Locked
  • Question
Incoming calls go to dial tone on Nortel MICS-XC 7.0
Replies
11
Views
1K
curlycord
curlycord
potrocito
  • Locked
  • Question
MICS 6.1 Incomplete CLID after STIR/SHAKEN 2
Replies
2
Views
307
exsmogger
exsmogger
Don W
  • Locked
  • Question
Mics software upgrade tools
Replies
9
Views
601
curlycord
curlycord
jjjjohn
  • Locked
  • Question
ASM repair ??? 1
Replies
1
Views
264
phonebits
phonebits
jsaad
  • Locked
  • Question
MICS GATC going dead 4
2
Replies
24
Views
1K
curlycord
curlycord

Part and Inventory Search

Sponsor

Back
Top