MICS 6.1 Not responding to F**266344

[mshmc]

In desperate need of help on this one...

I was in the middle of a provider test & turn up on a MICS 6.1 PRI and when I attempted to log in (no rad, programming via phone) I can enter F**config, but when it prompts for the password and I enter any of the default passwords, it does not respond (nothing at all!) it just sits at the password prompt. Everything else functions normally. Has anyone seen this? Does nayone have a solutions besides trying to defualting the system - I don't have the PRI key code and don't want to lose programming.

Any help is greatly appreciated!

John

 

[westcoaster]

Someone has gone and changed the config password on the system. your pretty much hosed on this one unless you have a laptop and a rad.....
put the rad on the system and use norstar manager to gain access and see/change the config password.
(this obviously is not the detailed list of directions)

.........................................................
Some people are like slinkies...not really good for anything, but seeing one tumble down the stairs makes you smile!

 

[mshmc]

Westcoaster - Thanks for the response. The really strange thing about this is that I was able to log into the system 2 days ago and nobody has touched it since then. This came out of nowhere.

Any other ideas are appreciated...thanks!

 

[MagnaRGP]

Someone has changed it...they just "forgot" to tell you.