Microplex M202Plus in NDPS 1

[kida]

Anyone out there still using the Microplex M202Plus? I'm trying to set it up under NDPS Netware 6 and having no luck! Connection is dropped or... if we can log into the server, the server can't communicate with the microplex!

Any ideas?

 

[marvhuffaker]

Not familiar with the Microplex. But your problem is probably in your LPR Queue name. When you setup a printer on NDPS, the default is PASSTHROUGH. Change it to one of the following and see if it helps. I assume you're using IP and the Novell Gateway. Try the following:

Microplex M202 (External) and Microplex M202+ (External) same as Printronix PrintNet:

'd1prn1' for parallel port 1
'd2prn2' for parallel port 2
'd3com1' for serial port 1
'd4com2' for serial port 2



Marvin Huffaker, MCNE

http://www.redjuju.com

 

[kida]

thanks! At first it worked but not consistantly... I configured for lpd also.... now it works GREAT

thanks!