dulem
Technical User
- Jul 10, 2002
- 39
I have 3640 router with BRI ports and 6 mica modems. ISDN call is accepted and everything work fine.
Connecting via analog modem produce lot of following mesagess (debug modem output)
May 27 14:43:40.491: Modem 1/2 Mica: in modem state SS_RETRAINING
.May 27 14:43:49.319: Modem 1/2 Mica: in modem state STEADY
.May 27 14:43:49.327: Modem 1/2 Mica: Retrained to 31200/26400 (Tx/Rx)
.May 27 14:44:09.271: Modem 1/2 Mica: in modem state SS_RETRAINING
.May 27 14:44:18.099: Modem 1/2 Mica: in modem state STEADY
.May 27 14:44:18.111: Modem 1/2 Mica: Retrained to 31200/26400 (Tx/Rx)
During this retraining phase dial-up client is not able even to ping router. When modem come in STEADY state connection is fine.
Is there some command to disable retraining after initial connection is made?
I'm using 12.3.5 IOS and MICA-6DM Firmware: CP ver 2950 - 9/9/2003, SP ver 2950 - 9/9/2003
Dule
Connecting via analog modem produce lot of following mesagess (debug modem output)
May 27 14:43:40.491: Modem 1/2 Mica: in modem state SS_RETRAINING
.May 27 14:43:49.319: Modem 1/2 Mica: in modem state STEADY
.May 27 14:43:49.327: Modem 1/2 Mica: Retrained to 31200/26400 (Tx/Rx)
.May 27 14:44:09.271: Modem 1/2 Mica: in modem state SS_RETRAINING
.May 27 14:44:18.099: Modem 1/2 Mica: in modem state STEADY
.May 27 14:44:18.111: Modem 1/2 Mica: Retrained to 31200/26400 (Tx/Rx)
During this retraining phase dial-up client is not able even to ping router. When modem come in STEADY state connection is fine.
Is there some command to disable retraining after initial connection is made?
I'm using 12.3.5 IOS and MICA-6DM Firmware: CP ver 2950 - 9/9/2003, SP ver 2950 - 9/9/2003
Dule
