Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations derfloh on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

MGCP Problem

Status
Not open for further replies.

bladeka

IS-IT--Management
Joined
Sep 23, 2004
Messages
51
Location
EG
Dear All :

Am using CCM version 4.0 with a 4FXO going to a MGCP gateway an E1 module going to a H.323 ,, am using a call accounting software ,,

I want to monitor the outgoing calls on the 4FXO port ,,

my problem is i want a command or translation on the router that remove the 9 before the phone number on a MGCP port from the router not from the CCM ..
her is part of my configuration ,,,
!
!
mgcp
mgcp call-agent x.x.x.x service-type mgcp version 0.1
mgcp dtmf-relay voip codec all mode out-of-band
mgcp modem passthrough voip mode nse
mgcp bind control source-interface FastEthernet0/1.1
!
voice-port 1/0/0
!
dial-peer voice 703 pots
application mgcpapp
port 1/0/0

can that be done ?
 
when using MGCP all pattern and dial string manipulation happens on the CallManager. You can apply this to your dial plan.

commsguy

 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top