MGC not registering to primery security domain in LD 117 REG UCM SYS

[alberto111]

Hi all,


MGC cannot able to register in security domain using command ld 117 reg ucm sys in release 6 cs1000e cores ss and cs.But its showing in linux base manager as element after issuing command joinSecDomain in MGC(oam prompt).After that i tried to register MGC in ld 117 ,,but same thing happening.Also callserver is not showing in linux elements like r6 cs1000e cs ans ss different platform.

 

[M1spezi]

I´ve had the same problem few days ago

Solution was :
LD 117

register ucmsecurity system
IP address of the Primary Security Server [10.200.10.11]: 10.200.40.11 (her i put in the ELan IP Adress of the Security server)

User Name (UCM): XXXXXXX

Password (admin):XXXXXXX


These elements are registered with the Call Server

MGC 10.200.40.30

MGC 10.200.40.20

Do you want to allow these 2 elements to request security domain membership using your credentials? (Y/N) [N] y

Sending messages to 2 elements authorizing them to request security domain membership.

Waiting for status updates from each of the elements...

.................

TIM2809 16:00 21/2/2010 CPU 0

..........

SEC101 Element 10.200.40.30 successfully requested membership in the security domain.

...

SEC101 Element 10.200.40.20 successfully requested membership in the security domain.

.The Call Server and 2 attached elements successfully requested security domain membership.
=> stat ucm
Central Authentication is enabled
=> stat ucmsecurity system
MGC 10.200.40.30 REGISTERED
MGC 10.200.40.20 REGISTERED

Meridian, Callpilot, CCM (Symposium) from Germany

 

[vztech]

Don't chaaa just luv 6.0

It's only dialtone-VZ