Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Chriss Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Message Networker import process
- Thread starter wpetilli
- Start date
- Thread starter
- #2
Ok, I found what I think I'm looking for. I'm networking to another system via VPIM and it looks like FTP is the preferred method of adding bulk remote subscribers into MN.
So my question now is regarding this icftp password. I have no idea what this would be set to. I see in general parameters that FTP is not enabled. I also found instructions to reset the FTP password, but I don't seem to have the same screens as the below. On my web interface I see a choice for 'icftp configuration' and it's asking for local authentication and password, which are both not populated. When I check in local administrators there's only an SA account and not icftp. I don't have the below.
Start at the Administration menu, and select Basic System Administration > Password Administration > Assign/Change Password.
The system displays the Assign/Change Password page.
Select icftp from the Login menu.
Type the new password in the New Password field.
Type the new password again in the Re-enter New Password field.
Click Save.
The password for the FTP process has now been updated.
Click Return to Main to return to the Administration menu.
So my question now is regarding this icftp password. I have no idea what this would be set to. I see in general parameters that FTP is not enabled. I also found instructions to reset the FTP password, but I don't seem to have the same screens as the below. On my web interface I see a choice for 'icftp configuration' and it's asking for local authentication and password, which are both not populated. When I check in local administrators there's only an SA account and not icftp. I don't have the below.
Start at the Administration menu, and select Basic System Administration > Password Administration > Assign/Change Password.
The system displays the Assign/Change Password page.
Select icftp from the Login menu.
Type the new password in the New Password field.
Type the new password again in the Re-enter New Password field.
Click Save.
The password for the FTP process has now been updated.
Click Return to Main to return to the Administration menu.
you need to have the damin login or craft to set this
Ken Means
"I find that the harder I work, the more luck I seem to have."
- Thomas Jefferson (1743-1826)
Ken Means
"I find that the harder I work, the more luck I seem to have."
- Thomas Jefferson (1743-1826)
- Thread starter
- #4
I was able to get this working all the way through and tested by adding 1 subscriber via ftp. The AVAYA doc specifies the syntax to create the ASCII file, but does not explain how to add multiple. What separates each entry? I tried:
remote machine|xxxx|name name|1|u|xxxx|company.com|en-US,remote machine|xxxx|name name|1|u|xxxx|company.com|en-US,remote machine|xxxx|name name|1|u|xxxx|company.com|en-US
It only added the first entry and failed on the 2 others and the log doesn't tell me why.
remote machine|xxxx|name name|1|u|xxxx|company.com|en-US,remote machine|xxxx|name name|1|u|xxxx|company.com|en-US,remote machine|xxxx|name name|1|u|xxxx|company.com|en-US
It only added the first entry and failed on the 2 others and the log doesn't tell me why.
the 2nd on needs to start on a new line you are showing it on the same line as the first.
Ken Means
"I find that the harder I work, the more luck I seem to have."
- Thomas Jefferson (1743-1826)
Ken Means
"I find that the harder I work, the more luck I seem to have."
- Thomas Jefferson (1743-1826)
- Thread starter
- #6
that how i remember it. It has been a while but i think that is it.
Ken Means
"I find that the harder I work, the more luck I seem to have."
- Thomas Jefferson (1743-1826)
Ken Means
"I find that the harder I work, the more luck I seem to have."
- Thomas Jefferson (1743-1826)
- Thread starter
- #8
- Status
Similar threads
- Locked
- Question