Meridian NARS/BARS

[ajfischer]

If anyone has a few minutes....give me NARS/BARS "101" programming instructions for an 11C. I want (2) access codes..."9" for local and "8" for long distance. Where do I get started...RLBs, RLIs, LD15, LD87, LD90 ??????
Thanks !!

 

[ArchibaldJCox]

I assume the PBX is currently in service, has routes built up, NCOS's built etc.
Quick overview:

LD 86 - ESN - program AC1 as 9 and AC2 as 8 (or vice versa)
LD 86 - RLB - program RLIs to use selected Routes
LD 90 - NXX - program AC1 Local NXXs, point to local RLI
LD 90 - NPA - program AC2 NPAs, point to L/D RLI
LD 90 - NXX - program AC2 L/D NXXs, point to L/D RLI
LD 90 - Verify that there are no AC1 NPAs or NXXs that shouldn't exist (PRT 0 NET SUM)

Arch

 

[ajfischer]

The system is up and running but is not using any NCOS's..how do they correspond to the ability to use NARS?

Thanks for the help Arch!!

 

[cmawbey]

this link my help..all hail the the G man

http://home.wi.rr.com/browser/ghtrout/files/bars101.html

Colin

 

[NortelGuy1979]

I agree - gave me a good head start on my NARS/BARS 2 week course. I passed it with flying colors since I had already looked at a lot of it on that site. -Matt

Matt H.
TMC - KCMO, USA