Meridian (CS 1000) to Telrad using QSIG 1

[nhphoneguy]

Has anyone succesfully connected an M1 to a Telrad switch using QSIG? If you could provide configs for either or both would be appreciated.
tnx

 

[johnpoole]

this is the qsig i have used for several switches, not a telrad but it's worked on any switch that users here have tried

http://www.tek-tips.com/viewthread.cfm?qid=1017219

john poole
bellsouth business
columbia,sc

 

[nhphoneguy]

Thanks John,
that's the same as what I had for Avaya. I can't get the d-channel to establish. If anyone can help my counterpart at the other end on the Telrad side as to hardware/configs that would be appreciated.