Meridan 11 CPU/Conf card (NTAK01CA) SDI port pinout

[lexer]

Hi, I've got an old Meridian 11 that uses a CPU/Conf card (NTAK01CA), please Does anybody have the DB-9 SDI port 0 pinout? I can see what pbx sends by port 0 but I type anything the port makes nothing.

 

[AvayaHE]

Has you set Flow Control XON/XOFF on your Terminal Software ?

 

[vztech]

https://www.tek-tips.com/viewthread.cfm?qid=1110571

I used to have super powers but my therapist took them away...

 

[StanleySteamer]

I think you want this

NTBK48AA - 3 Port SDI Cable

NTBK48AA 3 Port SDI Octopus Cable Pin Out. This cable is used to access the TTY port of an SSC or MGC card in a Media Gateway chasis.

pbxbook.com

 

[lexer]

Thanks for your answers, The CPU/Conf card of the Option 11 just has one SDI port 0, I tried with a serial cable DB-9(female) to DB-9(female) that came with the old SS NTDU27 (Intel ISP1100) and I worked, this is the cable configuration pinout:
1 -- 7,8
2 -- 3
3 -- 2
4 -- 6,9
5 -- 5
6,9 -- 4
7,8 -- 1