Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations bkrike on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Melco unit?

Status
Not open for further replies.
DOcean

DOcean

Programmer
Apr 5, 2004
200
US
Client needs to monitor sales floor from one or two stations. Anything out there besides Melco's?

System is an MICS with T-1 PRI.

Many thanks in advance,

D. Ocean
Miami, FLA
 
Sort by date Sort by votes
I have used the viking SO-24, it needs a pair back from each station.

There is also the NT digital option manager this would need to be set up as a patchpanel unless more than one unit was used.

----------------------------
JerryReeve
Communications Systems Int'l
com-sys.com
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

datajockey123
  • Locked
  • Question
Programming a MICS 7.1 with a Valcom 2006 Paging unit
Replies
3
Views
192
allworxguy
allworxguy
datajockey123
  • Locked
  • Question
Software requirements to run a T7316e with a KIM Unit
Replies
2
Views
163
curlycord
curlycord
datajockey123
  • Locked
  • Question
Adding KIM units to almost all extensions on system
Replies
4
Views
195
curlycord
curlycord
telllman
  • Locked
  • Question
smdr unit
Replies
2
Views
123
telllman
telllman
PERRYPJ
  • Locked
  • Question
C8 unit on a 8X24
Replies
6
Views
161
curlycord
curlycord

Part and Inventory Search

Sponsor

Back
Top