Hi, we're running V11.5 on MS 2003 server. The back up job is set to 'full' and being ran daily. It has worked fine for two days. Before each backup we make sure we've erased the cartridge and destroying its serial (until the rotation is done and every tape has been formatted. - These cartridge were used by ARCSRV IT. It is also important emphasize, we didnt upgrade but bought a whole new server and installed BrightStor on it.)
The problem is that BS does not recognize the cartridge:
- Multiplexing parent job.
- Media in device group GROUP0 is not in the scratch set of pool companyname.
- Please mount one of the following media in device group GROUP0: 1.<BLANK>
-------THE cartridge is BLANK!! (has been erased!!)--------
report replication:
Begin to check tape belong to pool 1
TUESDAY[S/N:] belongs to pool[companyname].
End to check tape belong to pool 1
Begin to get on-line tape list which belong to save set End to get on-line tape list which belong to save set
Begin to get on-line tape list which belong to scratch set Get scratch tape list p:1 vs sc:0
Global scratch tape count 0, GSS enabled[0]
Total scratch set tape count 0.
End to get on-line tape list which belong to scratch set
Begin bindAndSeekTape, SaveTapeListCount[0],
ScratchTapeListCount[0],blankTapeExist[0]
Ask Tape
Ask Tape 1
List tape for current job
Media in device group GROUP0 is not in the scratch set of pool companynamehere.
Please mount one of the following media in device group GROUP0:
1. <BLANK>
Job will be cancelled in 5 minute(s).
Find all tapes from scratch set(1)
Find # 0 of tape in save set
Find # 0 of tape in scratch set
Do Enum tape->iTapeName=WEDNESDAY,0,0 selectType=0
-----------------------------------------------------
What's going on?
The problem is that BS does not recognize the cartridge:
- Multiplexing parent job.
- Media in device group GROUP0 is not in the scratch set of pool companyname.
- Please mount one of the following media in device group GROUP0: 1.<BLANK>
-------THE cartridge is BLANK!! (has been erased!!)--------
report replication:
Begin to check tape belong to pool 1
TUESDAY[S/N:] belongs to pool[companyname].
End to check tape belong to pool 1
Begin to get on-line tape list which belong to save set End to get on-line tape list which belong to save set
Begin to get on-line tape list which belong to scratch set Get scratch tape list p:1 vs sc:0
Global scratch tape count 0, GSS enabled[0]
Total scratch set tape count 0.
End to get on-line tape list which belong to scratch set
Begin bindAndSeekTape, SaveTapeListCount[0],
ScratchTapeListCount[0],blankTapeExist[0]
Ask Tape
Ask Tape 1
List tape for current job
Media in device group GROUP0 is not in the scratch set of pool companynamehere.
Please mount one of the following media in device group GROUP0:
1. <BLANK>
Job will be cancelled in 5 minute(s).
Find all tapes from scratch set(1)
Find # 0 of tape in save set
Find # 0 of tape in scratch set
Do Enum tape->iTapeName=WEDNESDAY,0,0 selectType=0
-----------------------------------------------------
What's going on?