I have an LSP site (G450/S8300D)with an MM710 (DS1). There was a circuit issue and the carrier is indicating it's a sync issue on our equipment. When I log into the GW and do a 'show sync' it's showing slot V2 as the active. That's the slot where the MM710 is. Is that what should be the primary sync source or should it be V0?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Chriss Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Media Gateway Sync Source
- Thread starter wpetilli
- Start date
- Status
Similar threads
- Locked
- Question
- Locked
- Question