MD110 DPNSS Setup to connect to Westell iQ2000

[steve987]

I'm having problems getting a DPNSS link up to a Westell iQ2000 protocol convertor & onward via QSig to Cisco Call Manager. Config seems fine on Cisco side, but DPNSS link will not come up.
Does any one have any experience of doing this - or even just a doc on how to config the ericcson DPNSS side of things?
We're currently re-using a DPNSS link which was configured to support a BT VPN link between two sites. Current thinking is that we strip the Ericsson config and start again.
Thanks

 

[pawshman]

its the config for the westell box,

Had this ages ago, but dont have the paperwork for this anymore

its a real bodge job, using these Westell convertors