MCK or BCM 50?

[Tom2129]

Our client is opening a branch office in another state; the WAN circuit is a point to point T-1. Is it better to connect this office back to the home office Norsar MICS (6.1) using a VOIP gateway and BCM 50 or going with an MCK Extender and PBX Gateway?
Thanks
Tom

 

[ford53]

If you use a MCK extender and you are in another state or even city. How are you going to make local calls and 911 calls from the remote loc.?

 

[aragon]

Actually local calling is supported in the MCK remote extender 7000 with the optional T1 interface.
The T1 also supports PRI.
If you need analog line support then MCK recommends using a channel bank like the Adtran 500.
Check this out:

http://www.citel.com/products/extenders/datasheets/MCK_ADTRAN.pdf