max telnet sessions

[mucka]

hi guys ,has anybody seen a fault on a bps where it will not allow you access thro! TELNET , the error message is " max number of telnet sessions has been reached ".


thnx guys

mucka

 

[tonyjas]

I've just seen this happen today on one of our BPS's. I can access the switch via Web but no luck on thru Telnet. I was thinking of resetting the switch but first wanted to look around more on the web to see if anyone has come across this and figured out how to fix it. I've never seen this on the 450's or 350's that I've worked with.

BTW...here is the Firmware and Software that it is running

Business Policy Switch 2000
HW:07
FW:2.0.0.10
SW:v1.1.3.11
ISVN:2

jas

 

[fabianoboscatto]

Sorry for the question but is telnet enabled on BPS?

 

[mucka]

hi guys , I found that this bps had a NXS ram error at boot up and this was the problem !!!

thanks chaps

mucka

 

[Enviro]

We had the same problem, we upgrated to code FW 2.0.5.3 and SW 2.0.5.16, and it fixed the problem