Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations derfloh on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

MAS 3.0sp1 to MAS 4.0 upgrade Dial by name N/W

Status
Not open for further replies.

Cardine

Technical User
Joined
Jul 3, 2006
Messages
97
Location
CA
So the dial by name "works" but there is no intructions when you press "#" it's just silence, you can spell the name and it will call them but the system doesn't give you any prompts after you press #

I've tried stopping and staring nupoint...

Anyone had similar issues?
 
Trying to link using an iPhone
Might not work
Thread1329-1680641

**********************************************
What's most important is that you realise ... There is no spoon.
 
KWB, thanks for the reply, i changed the setting from AUTO to English US but it still doesn't work, i stopped and started NP but still nothing...same result.


I'll call mitel on Monday and see what they have to say.

 
This is a known issue and has been corrected. Please call into Product Support for additional assistance.
 
Just an update, i did as KWB suggested and tested it and it still didn't work, however the next day when i tested it again i was working fine....my only assumtion is it perhaps took a little time to "update"

Thanks KWBMitel for the response.
 
I was going to suggest an activation but your symptoms were not identical. Glad it worked though

**********************************************
What's most important is that you realise ... There is no spoon.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top