Manual for the TMC T16NB-2.20 motherboard?? 1

[eponymous]

Can you please help me locate the Manual for the TMC T16NB-2.20 motherboard.

Have been able to track earlier version (TMC T16NB-1.0c) ... if of interest:

http://mobokive.dyndns.org/Archive/Tmc

- MyComp - Mynix/manual/ti6nb10c.pdf

Problem is 1.0c version is for the Pentium II and require manual 2.20 version for Pentium III

Any help most welcome, including:

- filename.pdf for manual?
- spec differences between P2 & P3 versions?

Many thanks,
Denis

 

[mainegeek]

eponymous,
Page 14 sec 4.1 of the ti6nb10c.pdf shows the FSB settings.
It includes the settings for PIII.
According to the FSB it will run up to a 800mhz.
If you are currently running at 66 and the memory is native
to that mobo then chances are the memory is PC66 and would require upgrading to PC100 in order to run the PIII 800.

A cheaper way around the slot 1 pIII 800 secc type cpu would be to use a fcpga socket 370 to slot 1 adapter board
with a socket 370 800mhz cpu and attach a heatsink/fan.

here is a workable link to the page you specified.

http://mobokive.dyndns.org

 

[mainegeek]

correction.......CHAPTER 4.... not page 14.

 

[eponymous]

Mainegeek - Extremely helpful - Very many thanks, Eponymous