managing 2950 w/WWW interface problem

[WinKrushR]

In article

http://www.tek-tips.com/gviewthread.cfm/lev2/8/lev3/58/pid/558/qid/414776,

I found out how to manage the switch with the

http://WWW interface.

The problem is, now that the switches are in my production rack, I can't ping their VLAN IP, much less manage them. The cable from my computer simply goes up the ceiling, into a patch panel and is patched into the switches. Any ideas?

Info: I have (3) 2950s in a rack cascaded with crossover cables. Their VLAN address is 192.168.1.231 and mine is .121 of the same subnet. Nothing has changed since they were sitting on my desk and I was plugged into port 1.

Thanks for any help.

 

[oj88]

I guess, you have no choice but to do the dirty work of accessing the switch(es) via their console ports. From there, you should be able to see if anything's amiss. Orlando Palomar Jr
CCIE# 11206, CCNP
CIPT Operations Specialist
Phil-Data Business Systems, Inc.