Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Rhinorhino on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Malicious call trace
- Thread starter bubbaaa
- Start date
AvayaTier3
Technical User
activator 1 presses mct-act (flashing) .
on controller set - mct-ctrl (rings once then flashing).
activator 2 presses mct-act (flashing) .
on controller set - mct-ctrl (rings once continues flashing).
controller has not pressed mct-control - mct-ctrl (continues flashing).
when controller presses mct-ctrl the first time activator 1 mct-act (steady led)
and controller set mct-ctrl (continues flashing).
pressing mct-ctrl repeatedly steps through display info for the traced call
activated by activator 1. It will continue to do this until the controller dials
the de-activate code.
Controller goes off-hook on call-appr and dials de-activate code and activator 1
mct-act (led goes dark).
when controller presses mct-ctrl now, activator 2 mct-act (steady led)
and controller set mct-ctrl (stops flashing and goes steady).
Controller goes off-hook on call-appr and dials de-activate code and activator 2
mct-act (led goes dark) and controller mct-ctrl (led goes dark).
A great teacher, does not provide answers, but methods to teach others "How and where to find the answers"
bsh
37 years Bell, AT&T, Lucent, Avaya
Tier 3 for 27 years and counting
on controller set - mct-ctrl (rings once then flashing).
activator 2 presses mct-act (flashing) .
on controller set - mct-ctrl (rings once continues flashing).
controller has not pressed mct-control - mct-ctrl (continues flashing).
when controller presses mct-ctrl the first time activator 1 mct-act (steady led)
and controller set mct-ctrl (continues flashing).
pressing mct-ctrl repeatedly steps through display info for the traced call
activated by activator 1. It will continue to do this until the controller dials
the de-activate code.
Controller goes off-hook on call-appr and dials de-activate code and activator 1
mct-act (led goes dark).
when controller presses mct-ctrl now, activator 2 mct-act (steady led)
and controller set mct-ctrl (stops flashing and goes steady).
Controller goes off-hook on call-appr and dials de-activate code and activator 2
mct-act (led goes dark) and controller mct-ctrl (led goes dark).
A great teacher, does not provide answers, but methods to teach others "How and where to find the answers"
bsh
37 years Bell, AT&T, Lucent, Avaya
Tier 3 for 27 years and counting
- Status