SystemDown
MIS
Does command make_recovery on HP-UX 11.00 create a complete bootable and recoverable tape for the complete OS? Does this tape contain the entire Volume Group 00?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Rhinorhino on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Make_Recovery question 1
- Thread starter SystemDown
- Start date
- Status
-
1
- #2
100% Correct. With the make_recovery command you can create a fully bootable version of vg00 including the vg structures of all other volume groups. (stored under /etc/lvmconf ). A full version is created by adding the -A option like the example below :
make_recovery –A –d /dev/rmt/0m –t “Ignite tape xx/xx/xxxx”
cheers
George
make_recovery –A –d /dev/rmt/0m –t “Ignite tape xx/xx/xxxx”
cheers
George
jollyroger
Technical User
Although it sounds like you are using an old version of Ignite, they have changed these to:
make_tape_recovery
make_net_recovery
I would really think of upgrading. Simply remove your old version using swremove and install a new one.
All your configuration stuff should be retained.
make_tape_recovery
make_net_recovery
I would really think of upgrading. Simply remove your old version using swremove and install a new one.
All your configuration stuff should be retained.
- Status