LPU5 red alarm and PABX hang

[Edwin Effandy]

Hi Friends,
My MD 110 TSW version :
VERSION=CXP1010132/4/TSWSP03/R4A
It is always sometimes LPU5 Board goes red LED Alarm and PABX goes hang. After I push the button in LPU Display, then it will normally.
warm regards and pleased need assistance from all of you
Edwin

 

[TioDu62]

You probably have a HW problem. Hard do say exactly what board is. Can be LSU, DSU, the own LPU5 or even the DC/DC converter from magazine the LPU resides in.

 

[bpetya]

I think you also see an error code 101 in ALLOP, then the LSU card needs to be replaced.

 

[propose]

You print out ALLOP and capture

 

[Edwin Effandy]

<allop;ALARM LOG
IDENTITY: DEPOT-PLUMPANG
VERSION: CXP1010132/4/TSWSP03/R4A

DATE: *** TIME: 02:50:29
CLASS: 3
106 FAULTY I/O BOARD OR CONNECTED I/O DEVICE
DATE TIME ALP NOIF EQU BRDID INF1
*** 00:00:20 1 1 001-0-60-00 106 5

CLASS: 1
45 LIM RELOADED AND RESTARTED
DATE TIME ALP NOIF EQU INF1
*** 00:01:06 3 1 001---* 0

38 DISTURB. COUNTER INCREASED DUE TO FAULTY PROGRAM EXECUTION
DATE TIME ALP NOIF EQU INF1
*** 02:36:00 4 1 001-0-*-* 0

CLASS: 0
303 DATA LINK ALARM
DATE TIME ALP NOIF UNIT EQU BRDID INF1
*** 00:00:46 2 1 SLP60 001-0-00-00 57 256
RDATE RTIME
*** 00:00:46