Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations Chriss Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Logging of manual actions

Status
Not open for further replies.
Sort by date Sort by votes
Not from the GUI. However, if you do this from the command line you of course may save this to a file.

 
Upvote 0 Downvote
You can log any parameters changes by enabling "Monitor RAP" (Setup server).
Il will produce a /nsr/logs/rap.log file (very usefull)

 
Upvote 0 Downvote
Thank you speculos,

Monitor RAP is allready enabled but does not log all actions and manual recycling of volumes is not logged.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

S
  • Locked
  • Question Question
EMC Networker restore VM from tape , suggest manually labelling a new writable volume.
Replies
0
Views
2K
spirit_architect
S
P_Nab
  • Locked
  • Question Question
Networker loosing manually set read only status of tapes
Replies
0
Views
775
P_Nab
P_Nab
Robert Lee
  • Locked
  • Question Question
Rubber roller of Onstream drives have turned to goo in 2020.
Replies
7
Views
1K
edfair
edfair
SrCairo
  • Locked
  • Question Question
Migration of catalog of tapes from linux to windows
Replies
0
Views
330
SrCairo
SrCairo
Daftendireckt1
  • Locked
  • Question Question
How to restore manually backups from CV_Magnetic
Replies
0
Views
331
Daftendireckt1
Daftendireckt1

Part and Inventory Search

Sponsor

Back
Top