Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TouchToneTommy on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Logged on by remote bdc

Status
Not open for further replies.

mvelasco2

MIS
Jan 26, 2001
18
US
I have 2 local BDC's but my clients(NT 4.0) are being logged on by remote bdc's. Using NT 4.0 SP6A. There are no errors in Event viewer.

Any ideas?

Thanks,
Marlon
 
Check your WINS configuration and database. The clients will use WINS to locate a domain controller, and if WINS is pointing them in the wrong direction it will screw things up.

Bill
CNE, MCSE, CCNA, CCA, MCT, CCI

"I'd much rather be lucky than good"
 
And if your client are not WINS enabled and are set to use LMhosts file then you will have to manually enter the local domain controllers mapings using the #DOM and #PRE keywords.

Hope it helps.
Mubashir
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top