Log in and out externally

[onto888]

Manager 6.2, VMPro IP Office 500 VOIP 5610SW IP

Is it possible to connect shortcode *35*N# (login)& *36 (Logout) to the main menu selection in VMPro and have it work successfully?

The issue is I have 5 people that work remotely that need to login and out from an external phone. The clients do not want to use VPN phones or software, as they feel that this will bring down their network and they are limited to IP addresses as well.

It seems if I were to point the shortcodes to the main menu in VMPro it should work. However, I would just like some thoughts on this and to see if you think it would be successful or things I would need to look out for.

Thank you so much!

 

[intrigrant]

No way you can do that with VM Pro, these codes can only be dialed from a fixed station.
You can use mobile twinning.

 

[tlpeter]

A VPN phone will not use an ip address from the network where the ipo is.
So little amount of ip address is not an argument.
Like intrigrant said, mobile twinning is the way to go.


Homo sapiens non urinat in ventum

honey, i fried the IP Office !!!