local area code 970 is needed but with out the 1 only 10 digits

[ssinger1]

Hey guys,. Its been awhile sence I have touched a meridian.

I have a location in the 970 area code. Thier are over 580 exchanges for this area code. I was able to add them all but know I am being told to some of these exchanges need the area code added infron of the exchange but does not need the 1.
example (970)685-XXXX

Do I just place this in the NPA table as NPA 970?

thanks for taking the time to read this.

 

[bhassell2000]

yes build it in LD 90 as 970

Thanks,

Buddy

Linked in Profile

http://www.linkedin.com/in/buddyhassell

 

[PERRYPJ]

Before you build it in LD 90 print out 1800 and see what RLI it is pointing to, then you can build the 970 as a NPA with a local RLI.

OLD ROLMEN WORKING ON NORTELS AND AVAYA

 

[trvlr1]

You could offer the users the choice of dialing it 7 digit too by adding a DMI (LD 86) that would insert the NPA for you. You would still have to add the routing above of course.

 

[KCFLHRC]

You could build it as an NPA or SPN, really doesn't matter.