LMPX does not work with TM 3.1

[CanGoalie]

I am trying to set CLS LMPX using TM 3.1
I can select the option without problem but TM does not send it to the switch. If I do a printout of the set after transmission, LMPN is still present. I have to go in command line in order to set LMPX.
This worked fine in OTM 2.2

Is anyone aware of a patch that may rectify this?

Thank you for the help.

 

[1Rita1]

What patch do you have loaded?
I was able to change sets from LMPN to LMPX in TM 3.1 with patch SU3 by manually selecting it and by using Global Edit sucessfully.

 

[CanGoalie]

I do have SU3. Does it work when you create a new set? We use a template to create sets but the LMPX does not transfer properly.

 

[1Rita1]

I just created a new Template with LMPX then created a new 1120 set using the Template and it tranmitted with no problem. I would try updating the System Data and/or creating a new Template.

 

[CanGoalie]

Will try.

Thanks for your help.