listing all stations that are using a specific cover path 6

[SteveWebster]

Is it possible to issue a command to show all staions that have a specific cover path defined.

I am trying to change the config of our switch but have no doc's on what has been setup in the past and don't want to change anything that will affect other stations routing.

many thanks for any help.

Steve.

 

[TykeUK]

As far as I am aware there isn't a list usage coverage path option.

If you do a list extension-type, this will list all extensions and will show coverage paths. You can then sort this by Cv1 or Cv2 to show who is using what.

 

[s8700user]

disp coverage sender-group xx

 

[1a22ip]

Also in ASA to can export a bunch of data of the people in the coverage path

Hope this helps
ED
Humpty Dumpty was Pushed


1a2 to ip I seen it all

 

[g3rguy]

display coverage sender-group 1 Page 1 SPE B

COVERAGE SENDER GROUP

Group Number: 1

ASSIGNED MEMBERS ( Stations and groups assigned the same coverage path. )

s: station extension
p: personal CO line group number
t: terminating extension group number
h: hunt group number