Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations derfloh on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Linux COTS 7.6 install issue

Status
Not open for further replies.
KCFLHRC

KCFLHRC

Technical User
Joined
Aug 16, 2011
Messages
6,082
Location
US
My first 7.6. When I'm trying to install the Linux it hangs at "Write protecting the kernel read only data"

Any ideas
 
Sort by date Sort by votes
It's common to linux installations when something went wrong, missing, bad configured. There shuld be something that tells u about an error earlier in the installation.
 
Upvote 0 Downvote
Well it was my error, I needed to read what the screen was telling me. It used to be the default "com1" would work just fine. Now you have to type in KVM if you are installing with a direct connect keyboard, mouse and monitor. Just like Avaya to change something so simple.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

akak247
  • Question Question
Cs1000e 7.6 blind transfer not working
Replies
2
Views
176
akak247
akak247
akak247
  • Locked
  • Question Question
CS1000 7.6 email alerts
Replies
2
Views
614
Firebird Scrambler
Firebird Scrambler
akak247
  • Locked
  • Question Question
7.6 UCM Setup
Replies
2
Views
459
ramsay
ramsay
S
  • Locked
  • Question Question
Nortel Meridian + Norstar Flash Issue
Replies
4
Views
1K
Synapt
S
BSmith01
  • Locked
  • Question Question
Nortel PBX Password Change Issue
Replies
6
Views
874
BSmith01
BSmith01

Part and Inventory Search

Sponsor

Back
Top