Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations wOOdy-Soft on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Linksys SPA942 SIP Endpoint

Status
Not open for further replies.

bobbdeep1

Programmer
Feb 14, 2008
3
US
Anyone setup a Linksys SPA942 SIP phone with IPO?

I know, I know its not on the "supported" list but just looking to see if anyone has got it to work and how.
 
There is only a tested list, most of the SIP hardphoes should work with IP Office.
Every SIP phone i can lay hands on i have connected to IP Office, no one failed until now.

These are until now Siemens SIP set, SNOM, a few Samsung including a WiFi SIP phone and Cisco SIP phones.
 
Ok, just set it up and it works great. All simple features work - transfer, conference, voice mail etc

 
yes. Calls to digital and analog sets sound fine. calls to VPN phone sounded like crap.
 
by NAT i mean 2 or more remote subnets using public ip network addressing translation tables to port forward and allow through firewall settings of main site PBX on private LAN. All devices behind NAT. No VPN phone.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top