Link speeds

[telcomwork]

Anyone remember the command to verify the contacted speed of all your links? I'm tryign to see that I have a C-Lan programmed for 100 Full and what actually it's connected because the router guy is new and I don't think he's on the right switch. I running CM3.0

Thanks

 

[telcomwork]

Knew I would remeber after posting up...

"get ethernet xxxxx" where x's are board

Thanks!

 

[tbg247]

I am pretty sure "get ethernet" is not supported on CM3.x. I would do display/change "ip-interface xxyzz" letters= CLAN board location (e.g 01a02)

 

[telcomwork]

That won't give me connected speed though,, maybe configured but not actual. I ran this on CM3.0. Not sure about later versions...