LGGDK186 removing 'Loop key' from flex buttons?

[tyrex75]

As per title - I seemed to have assigned a Loop Key to most of my flex buttons, when I use the standard flex key clear procedure (TRANS/PGM + flex key + HOLD/SAVE) - I hear the three-pips sound and the key remains programmed as before. Can't seem to find any other method of clearing in my admin manual - station is not the main attendant (which is extn #200, problem phone is extn #203) - can anybody help please? TIA!

 

[montyzummer]

you ned to go into admin programming to do this or give the handset the sufficent rights to alter co programming(not enabled by default)

APSS (SME)
ACSS (SME)

 

[doktor]

You can do this using admin programming. I think it is PGM15 for flex keys. Next post I will give you the link to admin programming for GDK-100 (same as GDK-162/186 and GDK-FP-II)

///doktor

 

[doktor]

Anyway this link will give you the GDK ADMIN TOOL.
If you search a bit you should be able to find the GDK-100/186/162 Manual.

http://www.lg-nortel.es/lg-ericsson/area-tecnica/software-ipldk.php

///doktor