Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations Rhinorhino on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Least Cost Routing

Status
Not open for further replies.
mmaki

mmaki

Programmer
Joined
Jun 30, 2003
Messages
16
Location
YU
I tried least cost routing over VPN lines and it worked. But when I tried it with BRI and analog lines, it did not work at all. Can anyone help me with this?
 
Sort by date Sort by votes
I think we will need more detail to assist with this one
what short codes did you use & what happened to the call?
 
Upvote 0 Downvote
I have two groups with BRI line in one group (group 1) and analog lines in the other group (group 2).

Main route
short code:8N
telephone number:N
feature: Dial
line group: 1

Alternate route
short code:8N
telephone number:N
feature: Dial
line group: 2

When the BRI line is busy, it should route the call over the other group, but on the phone is displayed only "disconnected" or something similar.
 
Upvote 0 Downvote
What is the timeout set to in the main route?
I have simoilar programming in place that is working without a problem
 
Upvote 0 Downvote
I tried with 5 sec.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

finest
  • Locked
  • Question Question
MS TEAMS - DIRECT ROUTING
Replies
11
Views
972
IPOriface
IPOriface
rsv23
  • Locked
  • Question Question
SIP Trunk Routing
Replies
3
Views
663
rsv23
rsv23
finest
  • Locked
  • Question Question
MS Teams - Direct Routing
Replies
6
Views
1K
Menniss
Menniss
teletechman
  • Locked
  • Question Question
VCM DSP packet routing errors, invalid IP address
Replies
3
Views
564
teletechman
teletechman
pontim
  • Locked
  • Question Question
Teams Direct Routing Avaya SBCE
Replies
10
Views
1K
Ekster
Ekster

Part and Inventory Search

Sponsor

Back
Top